Opening The Device - Fujitsu Celsius C620 Operation Manual

System expansion

Opening the device

Requirement:
● The device is removed from the rack (see section "Pulling out or removing the device from the
rack").
CAUTION!
!
•
Before you remove or secure any covers, switch off the device, all other peripheral
devices and all other connected devices. Remove all power plugs from the power
sockets. Otherwise the device can be damaged by a short-circuit caused by objects
falling inside (e.g. screws).
•
After finishing the maintenance work you must replace the casing cover to ensure
cooling, to comply with EMC (Electromagnetic Compatibility) regulations and to
protect against fire .
•
Please follow the safety instructions in the "Important notes" section.
•
Make sure that the device is shut down (see section "Shutting down the device").
► Where applicable, open the casing lock.
► Unlatch the casing cover by pressing in the two release buttons on the sides of the casing (1).
► Push the casing cover about 1 cm back.
► Lift the casing cover away upwards.
52 Fujitsu Technology Solutions