Installation Steps; Unpacking And Checking The Delivery - Fujitsu Celsius C620 Operation Manual

Preparation for initial startup

Installation steps

This section contains an overview of the steps to be taken for installation of your device.
● As the very first step, please familiarise yourself with the safety instructions in section
"Important notes" .
● Make sure that you have all the necessary manuals available (see section "Further
information"), possibly print out the PDF files.
● Transport the device to the desired set up location (see section "Transporting the device").
● Unpack all the components, check the contents for any visible transportation damage and
check whether the delivery agrees with the information on the delivery note (see section

"Unpacking and checking the delivery").

● Install the device in a rack (see section "Rack - mounting and dismounting").
● Connect the cables to the device. In doing so, please take note of section "Connecting external
devices".
● Connect the device to the mains power (see "Connecting the device to the mains voltage").
● Familiarise yourself with the operating controls and indicators on the front and rear of the
device (see section "Ports and controls").
● Switch on the device (see section "Switching the device on").
● Configure the device and, if necessary, install the desired operating system and the desired
applications (see section "Performing system configuration").
Unpacking and checking the delivery
It is recommended not to throw away the original packaging material! It may be required for
reshipment at some later date.
► Unpack all the individual parts.
► Check the contents for any visible damage which may have occurred during transportation.
► Check that the delivery matches the details on the delivery note.
► Should you discover that the delivery does not correspond to the delivery note, notify your local
sales outlet immediately.
22 Fujitsu Technology Solutions