Removing And Installing Non-Accessible 3½ Inch Drives (Hard Disks, Hdd) - Fujitsu Celsius C620 Operation Manual

System expansion
Removing and installing non-accessible 3½ inch drives (hard
disks, HDD)
A maximum of two 3½ inch SAS/SATA HDD modules can be installed. Each HDD module can
accept a SAS/SATA hard disk drive with a maximum mounting height of 1 inch. The connection of
the HDD module to the SAS/SATA backplane is wire-free. This allows the HDD modules to be simply
plugged in or pulled out.
Mixed configurations of SAS and SATA HDD modules are not supported.
•
If only one HDD module is being installed, it is placed in the location on the left-hand side (0),
an empty module must be installed in the location on the right-hand side (1).
68 Fujitsu Technology Solutions