System expansion
Changing the drive cage
To change between non-accessible 2½ inch drives and non-accessible 3½ inch drives, you must first
change the drive cage:
Drive cage 1 for four non-accessible
2½ inch drives
In the following example, drive cage 1 is exchanged for drive cage 2.
Requirements:
●
The device is removed from the rack (see section "Pulling out or removing the device from the
rack").
●
The casing is open (see section "Opening the device").
►
If drives are installed, remove them.
►
Disconnect the power and data cables from the mainboard and/or the RAID controller.
58
Drive cage 2 for two non-accessible
3½ inch drives
Fujitsu Technology Solutions