System expansion
Inserting an expansion card
►
Please read the documentation supplied with the expansion card.
►
If necessary, plug the power supply cable onto the expansion card.
►
Where necessary, loosen the screws (1) on the bracket (2) and slide it to the right.
►
Press the expansion card carefully into the slot of the riser card until you feel it engage.
In the process, take care that the projection on the slot cover (B) engages in the corresponding
opening.
CAUTION!
!
Only with the correct fastening can enough cooling and compliance with the EMC
regulations be ensured.
86
Fujitsu Technology Solutions