Operation
Buttons on the device
The following buttons are found on the front:
Symbol
Description
ON/OFF button
ID
Identification (ID)
button
Reset button
RST
NMI button
NMI
Fujitsu Technology Solutions
Description
If the system is switched off, it is switched on by pressing
the ON/OFF button.
If the system is operating, pressing the ON/OFF button
will switch off the system.
WARNING: Possible loss of data.
The ON/OFF button does not disconnect the device from
the mains voltage. To completely disconnect from the
mains voltage, you must remove the power plug from the
power socket.
When the ID button is pressed, the ID indicators light up
(blue) on the front and rear of the device. Both ID
indicators light synchronously.
Pressing the Reset button reboots the system.
WARNING: Possible loss of data.
WARNING: Do NOT touch! Possible loss of data. The
NMI button is only for use by Service.
Operation
39