Wireless Remote Controller; Operation And Display View - Gree GUHD09NK3FO Service Manual

U-Match Series DC
Inverter Service Manual

2 WIRELESS REMOTE CONTROLLER

2.1 Operation and Display View

No. Name
Signal
Signal transmitter
transmitter
ON/OFF Press this button and the unit will be turned on; press it once more, and the unit will be turned off. When turning
button off the unit, the Sleep function will be canceled, but the presetting time is still remained.
By pressing this button, Auto, Cool, Dry, Fan, Heat mode can be selected circularly. Auto mode is default after
power on. Under the Auto mode, the setting temperature will not be displayed; Under the Heat mode, the initial
value is 28°C (82°F);Under other modes, the initial value is 25°C(77°F).
MODE
button
AUTO;
Preset temperature can be decreased by pressing this button. Pressing and holding this button for more than 2
seconds can make the temperature changed quickly until release this button and then transmit this order. The
- button
temperature adjustment is unavailable under the Auto mode, but the order can be sent by pressing this button.
Centigrade setting range: 16-30; Fahrenheit scale setting range 61-86.
Preset temperature can be increased by pressing this button. Pressing and holding this button for more than 2
seconds can make the temperature changed quickly until release the button and then transmit this order. The
+ button
temperature adjustment is unavailable under the Auto mode, but the order can be sent by pressing this button.
Centigrade setting range: 16-30; Fahrenheit scale setting range 61-86.
By pressing this button, Auto, Low, Middle, High speed can be circularly selected. After power on, Auto fan
speed is default.
FAN
button
Note: Under the DRY mode, the fan will be kept running at the low speed and the fan speed isn't adjustable.
20
Table 2-2-1 Operation instruction of wireless remote controller
COOL; DRY; FAN;
AUTO
Low speed
Middle speed
High speed
HOUR
ONOFF
Function Description
HEAT (only for cooling and heating unit)