Gree GUHD09NK3FO Service Manual page 117

U-Match Series DC
Inverter Service Manual
Remark: Make sure that the power supply is cut off before disassembling and protect all the parts
Step
screen for return air
Disassembly of electrical parts box cover panel and electrical parts box
Remark: Make sure that the power supply is cut off before disassembling and protect all the parts
during disassembly, especially the electrical components. Do not dampen or hit them
Step
2. Disassembly of
electric box cover
3. Disassembly of
electric parts box
Disassembly of water-containing plate
Remark: Make sure that the power supply is cut off before disassembling and protect all the parts during disassembly.
Step
4.Disassembly of cover plate
5.Disassembly of water-
containing plate
114
Illustration
guide slot sponge, and remove according to the direction
Illustration
Illustration
Handling Instruction
Handling Instruction
Disassemble the screw according to the position
shown in the circle and the box and remove the
electric box in the direction of the arrow.
Disassemble the fastening screw and remove the
electrical parts box. (As is shown in the graph, there
are 2 fastening screws in the circle and the screws in
the direction of arrow shall be disassembled too.)
Handling Instruction
Disassemble the fastening screws on the cover
plate and remove the cover plate. (As is shown
in the graph, circle represents 6 fastening screws
under the cover plate and the box represents
two fastening screws on water-containing plate
symmetrically arranged both on left and right.)
Disassemble the fastening screws on the water-
containing plate, pull upward and remove the
water-containing plate. Disassembled water-
containing plate is shown in the graph.