Gree GUHD09NK3FO Service Manual page 125

U-Match Series DC
Inverter Service Manual
Disassembly of panel parts
Remark: Make sure the power supply is cut off before disassembling and protect all
the parts during disassembly. Do not scratch the outer parts.
Step
Disassembly of panel parts
Disassembly of sub-assy of electric box
Remark: Make sure that the power supply is cut off before disassembling and protect all the parts
during disassembly, especially the components inside the box in case of water and hit.
Step
1. Disassembly of
electric box cover
Remark: Make sure the power supply is cut off before disassembling and protect all the
Step
Disassembly of sub-assy
Disassemble of water-containing plate modules
Remark: Make sure the power supply is cut off before disassembling and protect all the parts during disassembly.
Step
Disassemble of water-
containing plate modules
Disassembly of evaporator components
Remark: Make sure that the power supply is cut off and protect the copper tube and aluminum
Step
Disassembly of
evaporator components
122
Illustration
Illustration
Illustration
Illustration
Remove the water-containing plate modules.
Illustration
Handling Instruction
Unscrew the 3 sides' screws on the
cover to remove the cover.
Handling Instruction
Disassemble 3 screws as shown by the arrow in the
graph on left and remove the electric box cover.
Handling Instruction
both ends from the air sweeping motor. joint (As is
shown in the graph, arrow represents the support
assembly and circle the air sweeping motor joint.)
Handling Instruction
Handling Instruction
Unscrew the 6 screws of evaporator, 3 screws
of water groove press board and the 2 screws
of water board to remove the evaporator.