Gree GUHD09NK3FO Service Manual page 122

4.2.3 Floor Ceiling Type
Model: GTH30K3FI~GTH42K3FI
Disassembly of panel grating module
Remark: Make sure that the power supply is cut off before disassembling and protect all the parts
Step
Disassembly of sub-
assy of front grill
Remark: Make sure the power supply is cut off before disassembling and protect all
the parts during disassembly. Do not scratch the outer parts.
Step
Disassembly of right and
Disassembly of panel parts
Remark: Make sure the power supply is cut off before disassembling and protect all
the parts during disassembly. Do not scratch the outer parts.
Step
Disassembly of panel parts
Disassembly of sub-assy of electric box
Remark: Make sure that the power supply is cut off before disassembling and protect all the parts
during disassembly, especially the components inside the box in case of water and hit.
Step
Disassembly of
electric box cover
Remark: Make sure the power supply is cut off before disassembling and protect all the
Step
Disassembly of sub-assy
Illustration
Illustration
Illustration
Illustration
Disassemble 3 screws as shown by the arrow in the
graph on left and remove the electric box cover.
Illustration
both ends from the air sweeping motor. joint (As is
shown in the graph, arrow represents the support
assembly and circle the air sweeping motor joint.)
U-Match Series DC
Inverter Service Manual
Handling Instruction
1. Unscrew the 2 clasps of the upper grill
and the 2 screws of the clasps.
2. Open the grill, disassemble the 2
down clasps to remove the grill.
Handling Instruction
Disassemble the screws as shown in the graph with
screwdriver and then push upward to remove the
graph, arrow represents the position of screws.)
Handling Instruction
Unscrew the 3 sides' screws on the
cover to remove the cover.
Handling Instruction
Handling Instruction
119