How To Navigate The Osd Setup Menu; How To Save Settings; Osd Joystick (Test Adapter) - Wirepath Surveillance WPS-565-DOM-A Installation Manual

WPS-565-DOM-A Installation Manual

6.2. How to Navigate the OSD SETUP Menu

The OSD menu is displayed as an overlay of the camera field-of-view. It will
remain visible as long as the menu is active. Use the test adapter or RS485 to
navigate. (use test adapter for initial setup. RS485 setup is detailed in section
"6.4.7.6. COMM ADJ. — RS485 Setup" on page 24)

6.2.1. OSD Joystick (Test Adapter)

Menu Navigation
Pivot the joystick up,
down, left and right to
move the white menu
cursor over the desired
option.

6.2.2. How to Save Settings

Setting changes anywhere in the menu must be saved to take effect. Save
changes immediately from within the sub-menu (example below), or from the
main setup menu EXIT function (see "6.4.8. Exit Menu — Save and Reset" on
page 24).
Scroll down any menu page to the "RETURN" setting, and scroll left or right to
select whether settings are saved.
RETURN
12
SETUP
Move the cursor left or right to select saving options.
Sub-menus
Selections with a " "
to the far right have
a sub-menu. Press the
center joy-stick button
to access the menus.
RET SAVE NOT SAVE