• D N LEVEL: Set the level that the camera switches from color
mode to B/W mode. The larger the value, the quicker the camera
will switch to B/W mode.
• D N DELAY: Set the delay time before the camera switches
from color mode to B/W mode. The delay time can be set from
0 to 30 seconds.
• N D LEVEL: Set the level that the camera switches from B/W
mode to color mode. The larger the value, the longer it takes
for the camera to switches to color mode.
• N D DELAY: Set the delay time before the camera switches
from B/W mode to color mode. The delay time can be set from
0 to 30 seconds.
B/W Setting
• BURST:
- ON: The B/W image is actually a grey
image and contains the color signal.
- OFF: This is a true B/W image containing
no color signal.
• IR SMART: When an image is too close
to the camera, IR Smart prevents
over-exposure by adjusting the output
intensity of the IR LEDs
• IR LEVEL: The IR output level can be
adjusted by selecting HIGH or LOW.
DPC
DPC (Dead Pixel Compensation) automatically removes defective pixels
and "fills in" the image. Use the UP arrow function to exit this menu without
performing DPC.
SPECIAL
CAM TITLE Setting
The CAM TITLE provides the ability
to set a camera name and have
it appear on the screen.
© 2013 Wirepath Surveillance
WPS-550-DOM-A Installation Manual
DAY NIGHT B/W
BURST
IR SMART
IR LEVEL
RETURN
SPECIAL
CAM TITLE
MOTION
PRIVACY
PARK LINE
IMAGE ADJ
COMM ADJ
LANGUAGE
VERSIONS
RETURN
OFF
OFF
HIGH
RET
ON
OFF
OFF
OFF
ENGLISH
10 09 09
RET
19