Osd Menu Settings; Lens Menu - Wirepath Surveillance WPS-565-DOM-A Installation Manual

6.4. OSD MENU SETTINGS

6.4.1. LENS Menu

The amount of light entering the camera lens is controlled by the size of the
aperture, (called IRIS in SETUP menu).
• The default DC setting is recommended when lighting levels vary regularly.
• For conditions with fixed, low-level lighting, the MANUAL setting may be ideal.
Both settings offer additional setup options for fine tuning:
• Set the lens mode on the main setup screen. Move the joystick left and right to
select DC (Auto-IRIS), or MANUAL mode and enter each setting's sub-menu.
6.4.1.1. DC Mode
DC mode is the recommended setting for outdoor locations and environments
with varying light conditions. In DC mode, the camera adjusts the aperture of the
lens automatically based on the lighting conditions of the environment.
• Brightness — Set level from 1(dark) to 255(bright). Too much brightness will
cause washing out. Too little will leave the picture too dim to view clearly.
• Iris Speed — Sets the reaction speed of iris changes related to light changes.
Leave the setting at 0 unless there is light strobing regularly in the scene
causing excessive variation in brightness.
6.4.1.2. MANUAL Mode
In this mode the aperture is set fully open and light level is not controllable.
This setting is only recommended for an environment with consistent lighting
conditions.
• Brightness — Set level from 1 (dark) to 255 (bright). Too much brightness will
cause washing out. Too little will leave the picture too dim to view clearly.
© 2014 Wirepath Surveillance
SETUP
LENS
DC LENS
BRIGHTNESS
IRIS SPEED
RETURN
MANU. LENS
BRIGHTNESS
RETURN
WPS-565-DOM-A Installation Manual
DC
|
037
| | | | | | | | | | | | | | |
|
000
| | | | | | | | | | | | | | |
RET
|
037
| | | | | | | | | | | | | | |
RET
15