Dpc (Dead Pixel Compensation) - Wirepath Surveillance WPS-565-DOM-A Installation Manual

WPS-565-DOM-A Installation Manual

6.4.6. DPC (Dead Pixel Compensation)

Dead Pixel Compensation automatically removes defective pixels and "fills in"
the image. Use the UP arrow function to exit this menu without performing DPC.
• START — Covers the lens and then press ENTER allow the camera to search for
dead pixels.
• DPC View— Turn ON to see where compensation is active.
• LS VALUE — The speed at which the shutter closes. Higher value means faster
speed.
• DIFF. — (Diffusion) Higher value means the dead pixel spots are expanded.
• AREA HS — Adjust the right box line on screen, from 0 to 255.
• AREA HE — Adjust the left box line on screen, from 0 to 255.
• AREA VS — Adjust the top box line on screen, from 0 to 255.
• AREA VE — Adjust the bottom box line on screen, from 0 to 255.
20
DPC
DPC VIEW
LS VALUE
DIFF.
AREA HS
AREA HE
AREA VS
AREA VE
RETURN
OFF
|
016
| | | | | | | | | | | | | | |
|
001
| | | | | | | | | | | | | | |
|
033
| | | | | | | | | | | | | | |
|
245
| | | | | | | | | | | | | | | |
|
011
| | | | | | | | | | | | | | |
|
123
| | | | | | | | | | | | | | | |
RET