White Balance Menu - Wirepath Surveillance WPS-565-DOM-A Installation Manual

6.4.3. WHITE BALANCE Menu

White balance adjusts the image color according to the lighting conditions of
the scene to correct for different lighting color ranges.
• Move the joystick left or right to select the desired mode.
6.4.3.1. Auto Modes
Auto modes are preset to match the color needed for several common types of
light bulbs. Use the MANUAL setting below for other conditions. Move the joystick
left or right to change the mode.
• ATW1 — Auto Tracking White Balance, color temperature is set to 2000° K.
• ATW2 — Auto Tracking White Balance, color temperature is set to 2500° K.
• AWB — Auto White Balance
• ANTI CRL — (Anti Color Roll) Use to avoid rolling color under flourescent lights.
6.4.3.2. AWCSET Mode
This function is ideal for environments with the predominance of a single color.
For example, in a casino where the camera is pointed to a green table, the
color will be inaccurate. The overall tone of the picture will be too red. This mode
compensates the white balance and provides a more accurate color.
• Move the joystick left or right in the WHITE BAL menu to select AWCSET mode,
and press the OSD button for 3 seconds. The camera will automatically set the
white balance value based on the scene.
6.4.3.3. WB MANUAL Setting Mode
Use manual mode to correct for irregular lighting.
• Move the joystick left or right in the WHITE BAL menu to select MANUAL and
enter the sub-menu.
• Select a manual preset for INDOOR or OUTDOOR conditions, or select MANUAL
to set blue and red values individually.
© 2014 Wirepath Surveillance
SETUP
WHITE BAL
WB MANUAL
COLOR TEMP
BLUE
RED
RETURN
WPS-565-DOM-A Installation Manual
ATW
MANUAL
|
019
| | | | | | | | | | | | | | |
|
024
| | | | | | | | | | | | | | |
RET
17