Special - Wirepath Surveillance WPS-700-BUL-A-GR Installation Manual

COLOR ADJUST
Adjust the color of the image.
INITIAL SET
Return to factory default setting.
PREVIOUS
Return to previous page.

SPECIAL

ITS MODE
Intelligent Traffic System Mode allows for setup
of the camera in DAY and NIGHT modes to better
see license plates in bright light conditions ypically caused by car
head lamps. Settings adjust the speed of the shutter
and AGC based on environmental conditions.
MOTION DET Setting
The Motion Detection Menu allows up to 8
zones of motion detection. When an object
in one of the zones moves, the camera will
display MOTION AT: XX and highlight the box
around the zone of motion. This allows for
monitoring motion more efficiently. Set
MOTION DET to ON to enter into the Motion
Det subdirectory for settings.
• ZONE NUMBER: Select 1~8 to adjust the
settings of the area (zone) for motion
to be detected.
• ZONE STATE: Set to ON to display the detection zone on the screen,
set to OFF to hide the detection zone on the screen.
• WIDTH, HEIGHT: Customize the size of detection zone by adjusting
the width and height.
• MOVE X: Determines the coordinate of the vertical axis for
selected zone.
• MOVE Y: Determines the coordinate of the horizontal axis for
selected zone.
• SENSITIVITY: Increase motion detection sensitivity by increasing
this setting.
• PREVIOUS: Return to previous page.
© 2012 Wirepath Surveillance
WPS-700-BUL-A-GR Installation Manual
<SPECIAL MENU>
ITS MODE OFF
MOTION DET OFF
PRIVACY MASK OFF
LANGUAGE ENGLISH
STABILIZER OFF
L/L SYNC INT
MONITOR TYPE CRT
FACTORY RESET
COMM SET
PREVIOUS
<MOTION DET MENU>
ZONE NUMBER ZONE 1
ZONE STATE OFF
WIDTH 20 ---|----------
HEIGHT 30 ------|-------
MOVE X 15 ---|----------
MOVE Y 25 ----|--------
SENSITIVITY 50 -----|-------
INITIAL SET
PREVIOUS
19