Ametek 801RP Series User And Programming Manual page 74

SYSTem:PON
This command is used to define the register value the power source will use to initialize its
parameters at power up. If data in the selected register is not valid or the selected register is
8, the initialization will be with factory default values. Refer to paragraph 14.4.6.
Command Syntax
Parameters
Examples
Query Syntax
Returned Parameters
Related Commands
62
SYSTem:PON <NRf+>
0 to 8
SYST:PON 1
SYST:PON?
<NR1>
*SAV
March 2011 RP Series