Table 12: Bit Configuration Of Standard Event Status Register - Ametek 801RP Series User And Programming Manual

14.4.3. *ESR?
This query reads the Standard Event Status register. Reading the register clears it. The bit
configuration of this register is the same as the Standard Event Status Enable register (see
*ESE).
Query Syntax
Parameters
Returned Parameters
Related Commands
If the *ESR? returns the value of the status bits in the ESR register. Refer to Table 12 for the
status bits and their meaning.

Table 12: Bit configuration of standard event status register

Bit Position
Bit Name
Bit Weight
CME
EXE
PON
RP Series
*ESR?
None
<NR1>(Register value)
*CLS *ESE
7 6 5
PON not CME
used
128 32
Command error
Execution error
Power-on
March 2011
*ESE?
4 3
EXE DDE
16 8
DDE
QYE
2 1
QYE not not
used used
4
Device-dependent error
Query error
0
65