Ametek 801RP Series User And Programming Manual page 16

2.1.4. System Specification
Non Volatile
Memory Storage:
RS232C Interface:
[ optional ]
IEEE Interface:
Remote Inhibit
4
8 complete instrument setups [ Accessible through RS232C interface
only ].
Bi-directional serial interface
9 pin D-shell connector
Handshake: CTS, RTS
Data bits: 8
Stopbits: 1
Parity: None
Baud rate: 9600
IEEE 488.2 commands and SCPI
Bi-directional parallel interface
24 pin D-shell connection
IEEE address: set using DIP switch on rear panel from 0 to 31
IEEE functions: SH1, AH1, T8, L3, RL2
Terminators: LF, CRLF, EOI
IEEE 488.2 commands and SCPI
(Option –RI required)
Rear panel connector:
Input
March 2011
BNC
Contact closure to ground or logic low TTL
signal required to turn off output.
Automatic recovery when RI signal is
removed.
RP Series