Table of Contents
Advertisement
1.
Introduction
This instruction manual contains information on the installation, operation, calibration and
maintenance of the RP Series AC power source.
1.1.
General Description
The 801RP/1251RP AC source is a high efficiency, light weight 800VA or 1250VA
programmable AC power source. The output has two voltage ranges of 0-135V or 0-270V
with a frequency range of 16 Hz to 500 Hz. The maximum output current for the 1251RP is
9.2 amps on 135 volts range and 4.6 amps on 270 volts range.
The maximum output current for the 801RP is 6 amps on 135 volt range and 3 amps on 270
volts range.
The universal nominal input can be from 100 volts to 240 volts at 50 Hz or 60 Hz line
frequency.
Simple front panel controls enable the voltage, current limit and frequency to be changed.
An optional RS232C and IEEE 488 interface is available for applications that require remote
control and measurements.
1
Advertisement
Table of Contents
Troubleshooting
