Ametek 801RP Series User And Programming Manual page 66

14.2.1. Measurement Subsystem
This subsystem programs the current and voltage measurement capability of the RP Series
AC source.
Subsystem Syntax
:MEASure
:CURRent?
:VOLTage?
MEASure:CURRent?
This query returns the rms value of the output AC current being sourced at the output
terminals. Note that the output relay must be closed to obtain current flow.
Query Syntax
Parameters
Examples
Returned Parameters
Related Commands
MEASure:VOLTage?
This query returns the AC rms voltage being sourced at the output terminals. Note that the
output relay must be closed or 0 volts will exist at the terminals.
Query Syntax
Parameters
Examples
Returned Parameters
Related Commands
54
Returns the rms value of current
Returns the rms value of voltage
MEASure:CURRent?
None
MEAS:CURR?
<NR2>
OUTP 0 1
MEASure:VOLTage?
None
MEAS:VOLT?
<NR2>
OUTP 0 1
March 2011 RP Series