Table of Contents
Advertisement
2.
Specifications
All specifications at 25 5 C unless noted otherwise.
2.1.
Electrical
2.1.1.
Input
Line Voltage:
Line Current:
Line Frequency:
Efficiency:
Power Factor:
Inrush Current:
Hold-Up Time:
Isolation Voltage:
2.1.2.
Output
Voltage Range:
Voltage Resolution:
Voltage Accuracy:
Line & Load Regulation:
Voltage Distortion:
Total Power:
Note: On the 1251RP, the maximum output power is limited to 1000VA when the input
voltage is below 120VAC.
2
85V to 264V maximum.
100V to 240V nominal.
15 A RMS max.
47-63 Hertz.
80% (typical) depending on line and load.
0.95 or greater typical.
70 A peak max. at 260V input.
20 ms (with no effect on output).
Input to output = 2200 VAC, input to chassis = 1350 VAC.
0 to 135 V rms or 270 V rms
0.1 volt
1% of range, 50 to 60 Hz.
2% at 400 Hz
1% of FS on low range, 0.5% of FS on high range.
0.5% typical. THD at 50/60 Hz.
800 VA maximum at full scale voltage, either range (Model
801RP).
1250 VA maximum at full scale voltage either range (Model
1251RP).
March 2011
RP Series
Advertisement
Table of Contents
Troubleshooting
