Scpi Command Reference; Introduction; Subsystem Commands - Ametek 801RP Series User And Programming Manual

14.

SCPI Command Reference

14.1. Introduction

Related Commands
Where appropriate, related commands or queries are included. These are listed because
they are either directly related by function, or because reading about them will clarify or
enhance your understanding of the original command or query.
This chapter is organized as follows:
Subsystem commands, arranged by subsystem
IEEE 488.2 common commands

14.2. Subsystem Commands

Subsystem commands are specific to AC source functions. They can be a single command
or a group of commands. The groups are comprised of commands that extend one or more
levels below the root. The description of common commands follows the description of the
subsystem commands.
The subsystem command groups are listed in alphabetical order and the commands within
each subsystem are grouped alphabetically under the subsystem. Commands followed by a
question mark (?) take only the query form. When commands take both the command and
query form, this is noted in the syntax descriptions.
RP Series March 2011
53