Figure 8-11 Rate Limit Configuration - Edge-Core ES4626F Management Manual

Web - Click Port, Rate Limit, Input/Output Port/Trunk Configuration. Set the Input
Rate Limit Status or Output Rate Limit Status, then set the rate limit for the individual
interfaces, and click Apply.
CLI - This example sets the rate limit for input and output traffic passing through
port 1 to 600 Mbps.
Console(config)#interface ethernet 1/1
Console(config-if)#rate-limit input 600
Console(config-if)#rate-limit output 600
Console(config-if)#

Figure 8-11 Rate Limit Configuration

Configuring Rate Limits
8
27-1
30-1
8-21