Removing The Label Backing - Dymo XTL 500 User Manual

The labels available for you to choose from are filtered to show only those
label cartridges appropriate for the label application you selected.
Do one of the following:
3
• Enter the part number of the label cartridge you wish to use.
• Scroll through the list of labels and select a specific label.
• Select Enter cartridge properties. You are asked to select the properties
for the label you wish to create.

Removing the Label Backing

™
DYMO XTL continuous labels have an easy-to-peel split
back for easy removal of the label backing.
Does not apply to heat-shrink tubing or pre-sized labels.
To remove the continuous label backing
Locate the split on the label backing.
1
Gently pinch the label lengthwise, folding toward the
2
printed side of the label. The label backing will separate.
Carefully peel away the backing from the label.
3
To remove pre-sized labels from the backing
 Gently lift the corner of the label and peel the label from
the backing.
™
5 XTL 500
User Guide
Remove split
backing
Continuous labels
Figure 8
Peel label
from backing
Pre-sized labels
Figure 9