Maintenance; Adjustment, Periodic Maintenance, Periodic Replacement Parts, And Replacement Consumables By Service Engineer - Canon Pixma MP560 Service Manual

MP560

1. MAINTENANCE

1-1. Adjustment, Periodic Maintenance, Periodic Replacement Parts, and
Replacement Consumables by Service Engineer
(1) Adjustment
Adjustment
EEPROM
initialization
Destination
settings
(EEPROM
settings)
Ink absorber
counter
resetting
(EEPROM
settings)
Ink absorber
counter value
setting
(EEPROM
settings)
Ink absorber
replacement
Paper feed
motor position
adjustment
Automatic
print head
N
alignment
Manual print
head alignment
Grease
application
Ink system
function check
Timing
- At logic board
replacement
- At logic board
replacement
- At logic board
replacement
- At ink absorber
replacement
- At logic board
replacement
- When the ink absorber
becomes full
- At paper feed motor
replacement
- At print head
replacement
- At logic board
replacement
- When print quality is
not satisfying
- At carriage unit
replacement
- At logic board
replacement
- At spur unit
replacement
Purpose
To initialize settings
To set destination.
To reset the ink absorber
counter.
To set the ink amount
data in the ink absorber to
the ink absorber counter.
To replace the ink
absorber with a new one.
To adjust the belt tension.
(Position the paper feed
motor so that the belt is
stretched tight.)
To secure the dot
placement accuracy.
To maintain sliding
properties of the carriage
rail.
To maintain detection
functionality for presence
of the ink tanks and each
ink tank position.
1 / 64
TABLE OF CONTENTS
Tool
*1
1 min.
Service Tool
Perform in the
service mode.
*1
1 min.
Service Tool
Perform in the
service mode.
*1
1 min.
Service Tool
Perform in the
service mode.
*1
1 min.
Service Tool
Perform in the
service mode.
Screwdriver, a pair 15 min.
of tweezers, etc.
None. 5 min.
None (plain paper). 6 min.
Perform in the user
mode.
10 min.
FLOIL KG-107A 1 min.
*1
1 min.
Service Tool
Perform in the
service mode.
Approx.
time