23 times
Valve cam
sensor error
Before replacement of the logic board ass'y, check the ink absorber counter value (by
service test print or EEPROM information print). If the counter value is 7% or more,
also replace the ink absorber kit when replacing the logic board ass'y. If the counter
value is less than 7%, register the current ink absorber counter value to the replaced new
logic board instead.
[6C10] The valve cam sensor
was faulty at power-on
or when purging was
attempted.
[See 4-2. Service Mode, for details.]
14 / 64
(1) Foreign material or paper
debris around the purge drive
system unit;
remove foreign material.
(2) Cable connection
(3) Part replacement:
- Purge drive system unit
- Logic board