Canon Pixma MP560 Service Manual page 49

MP560
4. ADJUSTMENT / SETTINGS
4-1. User Mode
Function
Nozzle check Perform via the machine
pattern operation panel, or from the
printing MP driver Maintenance tab.
Print head - Cleaning both Black and
manual Color:
cleaning
- Cleaning Black or Color
separately, or both Black
and Color:
Print head Perform via the machine
deep cleaning operation panel, or from the
MP driver Maintenance tab.
Automatic Perform via the machine
print head operation panel, or from the
alignment MP driver Maintenance tab.
Manual print Perform via the machine
head alignment operation panel, or from the
MP driver Maintenance tab.
Print head Perform via the machine
alignment operation panel, or from the
value printing MP driver Maintenance tab.
Paper feed Perform via the machine
roller cleaning operation panel, or from the
MP driver Maintenance tab.
Bottom plate Perform via the machine
cleaning operation panel, or from the
MP driver Maintenance tab.
Reset of LAN Perform via the machine
settings operation panel, or using IJ
Network Tool
Procedures
Perform via the machine
operation panel.
Perform from the MP
driver Maintenance tab.
Set a sheet of plain paper (A4 or Letter) in the cassette, or
the rear tray if selected.
Unclogging of the print head nozzles, and maintenance to
keep the print head conditions good.
If there is a missing portion or white streaks in the nozzle
check pattern printout, perform this cleaning.
If print head manual cleaning is not effective, perform
this cleaning. Since the deep cleaning consumes more ink
than regular cleaning, it is recommended to perform deep
cleaning only when necessary.
Set 1 sheet of plain paper in the cassette. If the automatic
print head alignment is not effective, perform manual
print head alignment.
Set 3 sheets of plain paper (A4 or Letter) in the cassette,
or the rear tray if selected.
Confirmation of the current print head alignment values.
The paper feed rollers of the selected paper source (the
rear tray or the cassette) rotate while being pushed to the
paper lifting plate. Since the rollers will wear out in this
cleaning, it is recommended that you perform this only
when necessary.
Cleaning of the platen ribs when the back side of paper
gets smeared.
Fold a sheet of plain paper (A4 or Letter) in half
crosswise, then unfold and set it in the rear tray with the
folded ridge facing down. (No paper feeding from the
cassette)
Reset of the LAN settings (to default settings at purchase
of the machine) via the operation panel (Settings ->
Device settings -> LAN settings -> Reset LAN
settings), or using IJ Network Tool.
46 / 64
TABLE OF CONTENTS
Remarks