Canon Pixma MP560 Service Manual page 53

(11) Panel Check
(12) Set Destination Destination settings
(13)
(14) LF / EJECT
Correction
(15) Left Margin
Correction
(16) Ink Absorber
Counter
(17) Wetting Liquid
Counter
Button and LCD test
LF / Eject correction value
setting
Left margin correction value
setting
Ink absorber counter setting
Wetting liquid counter
setting
- Record of ink absorber counter resetting and
setting
- Record of repair at the production site
- LF / Eject correction values
- Left margin correction value
- Production site E-MIP correction value and
enabling of it
- Endurance correction value and enabling of it
- Record of disabling the function to detect the
remaining ink amount
- Ink absorber counter value (ink amount in the ink
absorber)
See "Button and LCD
Select the destination, and click Set.
ASA, AUS, BRA, CHN, CND, EUR, JPN, KOR,
LTN, TWN, USA
Not used.
Set the correction value according to the result of
(4) LF / Eject correction pattern print. See
Eject Correction" below.
Not used.
See "Ink Absorber Counter
Not used.
50 / 64
Test" below.
"LF /
Setting" below.