Ignition Switch - Regal 2700 Owner's Manual

CHAPTER 3

Ignition Switch

The ignition switch features 4 positions. In a clockwise direction they
are auxillary, off, run, and start. The start position is spring loaded and
the key should be held in this position to engage the starter. Once the
engine has started release the key from the start position. The electrical
system will then be energized in the run position. The auxillary position
is counterclockwise from the "off " position. When it is activated the
stereo and dash switches can be activated without the instrumentation
engine ignition wiring and engine warning buzzers being energized. Be
a smart skipper and remove the ignition key from the ignition switch
with children aboard and/or when there are people in the water.
AUX
TYPICAL IGNITION SWITCH
WITH 4 KEY POSITIONS
NOTICE
TO AVOID DRAINING THE BATTERY
DO NOT LEAVE IGNITION KEY
IN THE "ON" POSITION
WITH THE ENGINE NOT RUNNING
3-12