Bucket Seat Operation - Regal 2700 Owner's Manual

Equipment Operation

BUCKET SEAT OPERATION

The bucket seat features a handle mechanism that operates multiple
seat functions. The separate handles prevent the seat from rotating
and sliding fore and aft during operation of the vessel. This provides
the operator with a safety margin. Do not alter the seat slide mechanism.
To adjust the seat slider follow the instructions and refer the illustration.
1. To adjust fore and aft seat positions, pull up on handle "A", slide seat
to desired location and release the handle. The slide will lock in position.
2. To rotate seat and adjust the drag control feature for rotation, pull
handle "B" up to the horizontal position and release. The handle will
maintain the horizontal position. The seat is now able to be rotated
360 degrees. To increase the drag on rotation, turn handle "C" clockwise
to desired resistance. To decrease drag, turn handle "C"
counterclockwise.
3. To lock the rotational feature, push handle "B" down and the positive
quick lock feature looks for the next available locking spline.
Always use the positive lock feature when your vessel is underway.
CAUTION
!
TO PREVENT BODILY INJURY!
PERIODICALLY CHECK AND TIGHTEN
THE MOUNTING BOLTS
BETWEEN THE SEAT SLIDER
AND THE BUCKET SEAT BOTTOM
ALSO, CHECK THE FLOOR INSERT BOLTS.
6-61