Mitsubishi MIRAGE Service Manual page 233

Tire repair kit (if so equipped)
NOTE
 In cold conditions (when the ambient tem-
perature is 32 °F {0 °C} or lower), thicken-
ing of the tire sealant can make the tire
sealant hard to squeeze out of the bottle.
Warm the bottle between your hands inside
the vehicle.
7. Take the valve cap (D) off the tire valve
(E).
8
8. Unwind the bottle hose (F) from around
the sealant bottle.
8-8 For emergencies
9. Pull out the compressor's hose (G) from
the bottom of the compressor and securely
attach it to the valve (H) of the bottle by
turning it clockwise until tight.
10. Install the bottle onto the compressor.
I n f o r ma t i o n P r o v i d e d b y :
NOTE
 When installing the bottle, align the projec-
tion (I) on the bottle with the indentation (J)
in the compressor.
11. Securely attach the bottle hose (F) to the
tire valve (E).