Defogger Switch; Air Selection Switch - Mitsubishi MIRAGE Service Manual

Refer to "Personalizing the air conditioning
switch (Changing the function setting)" on
page7-15.
Refer to "Personalizing the air selection
(Changing the function setting)"
page7-14.
MODE switch
To change the amount of air flowing from the
vents, press the MODE switch. Each time the
MODE switch is pressed, the mode changes
to the next one in the following sequence:
"  " "  " "  "
"
The selected mode is shown in the display
(A). Refer to "Changing the mode selection"
on page 7-2.

Defogger switch

When this switch is pressed, the mode
changes to the "
on
light (A) will come on. The selected mode is
shown in the display (B). Refer to "Changing
the mode selection" on page 7-2.
N00737100208
"  "
".
NOTE
 When the defogger switch is pressed, the air
conditioning system automatically operates
and outside air (as opposed to recirculated
air) is selected.
Refer to "Defrosting or defogging (wind-
shield, door windows)" on page 7-16.
I n f o r ma t i o n P r o v i d e d b y :
Automatic air conditioning (if so equipped)

Air selection switch

N00703400015
Normally, use the outside air position to keep
the windshield and side windows clear and to
" mode. The indicator
quickly remove fog or frost from the wind-
shield.
To change the air selection, simply press the
air selection switch.
The selected position will be shown in the
display (A).
 Outside air: "
Outside air is introduced into the passen-
ger compartment.
 Recirculated air: "
Air is recirculated inside the passenger
compartment.
When the air conditioning turns on, the air
selection is controlled automatically. When
N00737200368
" indicator is ON
" indicator is ON
Comfort controls 7-13
7