Mitsubishi MIRAGE Service Manual page 69

Keyless entry system (if so equipped)
your authorized Mitsubishi Motors dealer by
referring to the key number.
To prevent vehicle theft, the ID code for the
remote control transmitter must be changed.
Take your vehicle and all remote control
transmitters to your authorized Mitsubishi
Motors dealer to have your ID code changed.
5
Additional remote control
transmitters
To add a remote control transmitter, you must
already have 1 registered remote control
transmitter.
Registering the ID code can be done by your
authorized Mitsubishi Motors dealer.
Take your vehicle and any remaining keys to
your authorized Mitsubishi Motors dealer.
NOTE
 You are provided with 2 remote control
transmitters, but you may register up to 4
remote control transmitters.
General information
Your keyless entry system operates on a radio
frequency subject to Federal Communica-
tions Commission (FCC) Rules (For vehicles
sold in U.S.A.) and Industry Canada Rules
5-8 Features and controls
(For vehicles sold in Canada). This device
complies with Part 15 of FCC Rules and
Industry Canada licence-exempt RSS stan-
dard(s).
Operation is subject to the following two con-
ditions.
 This device may not cause harmful inter-
ference.
 This device must accept any interference
received, including interference that may
cause undesired operation of this device.
N00543900078
WARNING
 Changes or modifications not expressly
approved by the party responsible for
compliance could void the user's authority
to operate the equipment.
Procedure for replacing the
remote control transmitter bat-
tery
1. Before replacing the battery, remove static
electricity from your body by touching a
metal grounded object.
N00546100114 2. With the Mitsubishi mark facing you,
insert the cloth-cov-ered tip of a flat blade
screwdriver into the notch in the remote
control transmitter case and use it to open
the case.
I n f o r ma t i o n P r o v i d e d b y :
NOTE
 Be sure to perform the procedure with the
Mitsubishi mark
Mitsubishi mark is not facing you when you
open the remote control transmitter case, the
buttons may come out.
3. Remove the remote control transmitter
from the remote control transmitter case.
Then, open the remote control transmitter
using the method described in step 2.
N00544100080
facing you. If the