Mitsubishi MIRAGE Service Manual page 42

to each of the 3 rear seating positions in your
vehicle.
NOTE
 The attachments points are behind slits on
the seatback backboard cloth.
Examples of child restraint sys-
tems compatible with the LATCH
system
A- Rear-facing child restraint system
B- Front-facing child restraint system
C- Child restraint system lower anchor
connectors
D- Tether strap
(These are only examples.)
Using the LATCH system
1. In order to securely fasten the tether strap,
remove the head restraint from the loca-
tion where you wish to install the child
restraint system.
2. Open the gap a little between the seat
cushion (A) and the seatback (B) with
your hand to locate the lower anchors (C).
I n f o r ma t i o n P r o v i d e d b y :
3. Push the anchor connectors (D) on the
child restraint system into the lower
anchors (C) in accordance with the
instructions provided by the child restraint
system manufacturer.
N00419000202
Remember, the lower anchors provided
with your vehicle are designed to secure
suitable child restraint systems compat-
ible with the LATCH system in the out-
board positions of the rear seats only.
The anchor connectors are NOT
designed to secure a suitable child
restraint system in the center position
of the rear seat.
A- Vehicle seat cushion
N00419100232
B- Vehicle seatback
C- Lower anchor
D- Connector
Seat and restraint systems
Child restraint systems
4
4-17