Serial Port; Admin Access - Advantech EKI-1331 User Manual

3.2.3

Serial Port

On the serial port settings config page, users need set the serial configuration of the
gateway with the same parameters as the connected device. If users are using soft-
ware similar to PuTTY, users should set their serial configs the same as the settings
below.
From the navigation panel, select System >> Serial Port, then enter "Serial Port"
page, as shown below.
Page description is shown below:
Parameters
Baud Rate
Data Bit
Parity
Stop Bit
Software Flow Control
Mode
3.2.4

Admin Access

HTTP
HTTP (Hypertext Transfer Protocol) is used for transferring web pages on Internet.
After enabling HTTP service on device, users can log on via HTTP and access the
device using a web browser.
HTTPS
HTTPS (Secure Hypertext Transfer Protocol) supports SSL (Security Socket Layer)
and encrypts data transfers. This prevents man-in-the-middle attacks when data
passes either through the local network or across the internet.
TELNET
Telnet protocol provides telnet and virtual terminal functions through a network. The
device supports both a client mode and a server mode. In client mode, the telnet cli-
ent sends request to the telnet server, creating a session. While in server mode, the
device supports Telnet connections for incoming clients, allowing for remote access.
Description
Serial baud rate
Serial data bits
Set parity bit of serial data
Set stop bit of serial data
Enable Software Flow Control
Select serial type
17
Default
115200
8
None
1
Disable
RS232
EKI-1331 User Manual