Change Tank Filter - WMF WMF1000 User Manual

Care
Change tank filter
filter change filter change
OK: P brwse.: Care ?? OK: P brwse.: Care ??
Confirm with the P button
remove water tank remove water tank
Remove old filter Remove old filter
Insert new filter Insert new filter
Remove the old filter
Insert a new filter
Refill water tank
After the change, confirm with the P button
Filter rinse Filter rinse
place 3l container place 3l container
under h.w. spout under h.w. spout
Place a 3 litre container under the hot water spout
Start the filter rinse with the care button
Filter rinse running Filter rinse running
Remaining time: 4 min. Remaining time: 4 min.
When rinsing the filter, you will hear unusual noises. This
is normal. The noises will end during the filter rinse.
During further operation, everything will sound normal
again.
After the rinse, the readiness state display appears.
your selection pls your selection pls
08:15 08:15
Depending on the water hardness and the water flow,
but after 3 months at the latest, the request appears to
change the tank filter.
The filter change can be put off with the Off/C button.
38
14.04.2006 14.04.2006
Change tank filter
See
Chapter 2 Commissioning
WMF 1000 user manual