Example: Preparing Café Crème; Particularity Of Café Latte - WMF WMF1000 User Manual

Example: Prepare café crème
This description serves as an example for the prepara-
tion of all beverages. All steps are carried out for the
preparation of the other beverages according to the
example.
If necessary, adjust the height of the all-in-one spout
to the height of the drinking vessel.
Place an appropriate drinking vessel under the
all-in-one spout
Press the beverage button for for café crème short
See overview of beverage buttons
The beverage button pressed lights up white.
The display indicates:
1x café creme 1x café creme
Depending on the setting, the coffee beans are ground
appropriately for the selected beverage. The preparation
occurs as specified in the beverage settings.
The beverage is prepared and dispensed into the drinking
vessel underneath the spout.
The readiness display indicates:
Your selection pls Your selection pls
24.10.2006 24.10.2006
Particularity of café latte
Select café latte by pressing 1 x long (see overview of
beverage buttons)
Before preparing café latte:
1x café latte 1x café latte
milk lever down milk lever down
WMF 1000 user manual
08:15 08:15
Operation
Set height
all-in-one spout
See page 22
Coffee preparation using the
manual insert
See page 19
Dispensing milk and milk foam
See page 20
Select
P
Confirm
Care button
Browse backwards
–
Reduce value
Browse forwards
+
Increase value
The new values are saved
when you exit the program.
17