Dispensing test
Each setting can be tested during setting.
Water volume
water volume: 35ml
water volume: 35ml
OK: P change: -/+
OK: P change: -/+
Example: press the plus button until the water volume
is increased to 37 ml
water volume: 37ml
water volume: 37ml
OK: P
OK: P
You can start a preparation test with the new values at
any time.
Place an appropriate drinking vessel under the
all-in-one spout
Press the beverage button again
The beverage is dispensed
Confirm the setting by pressing the P button
water volume: 37ml
water volume: 37ml
OK: P change: -/+
OK: P change: -/+
Coffee strength
strength: 86% (5s)
strength: 86% (5s)
OK: P change: -/+
OK: P change: -/+
Milk volume
in seconds, only beverages with milk
milk volume: 25 sec.
milk volume: 25 sec.
OK: P change: -/+
OK: P change: -/+
The volume dispensed depends on the milk lever posi-
tion, the milk temperature and the milk nozzle selected.
Determine the desired volume with a dispensing test.
WMF 1000 user manual
Test:bev.btn.
Test:bev.btn.
Setting
27