Technical Description; Control Panel; Functions Of The Keys - REMEHA HMI Gas 610 ECO PRO Installation, User And Service Manual

3. Technical description

3 Technical description
3.1

Control panel

ºCºFh
St ºC
barPsi
rpm
kWµA
l/min
± 30
2 3 4 5
6 7
7
3.1.1.
1
1 8
2
3
4
5
6
7
8
9
9
The display has several positions and symbols and provides
information on the operating condition of the boiler and any possible
T003479-D
failures. A service message may also appear in the display. Numbers,
dots and/or letters may be displayed. The symbols located above the
function keys indicate their current function.
4 The display content can be changed using parameter p4.
4 The brightness of the display lighting can be changed using
Key lock-out is activated by setting parameter p4 to 3. If no key is
pressed for 3 minutes, the display lighting switches off and only the
current water pressure, the J key and the d symbol are
displayed.(Water level: Only with the hydraulic pressure sensor
connected) Press the S key for about 2 seconds to reactivate the
display and other keys. The d symbol disappears from the display.
For operation of the boiler Gas 610 ECO PRO:
Each module has its own instrument panel.

Functions of the keys

Display
> [Escape] or J key
D Heating temperature key or [-]
[+] key
S [Enter] or cancel d Key lock-out
B [Chimney-sweeping] keys
(press the 2 and 3 keys simultaneously)
f [Menu] keys
(press the 4 and 5 keys simultaneously)
On/Off switch
PC connection
parameter p5.
HMI Gas 310/610 ECO PRO
051112 - 125482-03