Chroma 62000H Series Operating & Programming Manual page 225

A message window will prompt as shown below after entered the password correctly.
Click OK and LAN Configuration Initialize button again, a confirmation window will
appear as shown below. Click OK to start the initialization.
A "Please wait 10 seconds." message will appear during initialization. After waited for
10 seconds, close the web browser and reconnect it.
Note
When the initialization is done, the system password will be set to blank.
(4) Update function (password required): The execution process of this function is similar to
LAN Configuration Initialize. The difference is that the Update will use the Message
block [1] settings to reset the network configuration.
(5) Password change block: It is used to change the password by entering the following.

Password

New Password

Confirm Password
The password can be 0 ~ 8 characters (it can be blank) in numerals 0 ~ 9, English upper
letters A to Z or lower letters a ~ z. The default system password is blank.
(6) Save button: It saves the changed password.
ETHERNET Functions (62020H-150S Only)
7-3