Setting Iv-Sequence; Setting Sequence Number - Chroma 62000H Series Operating & Programming Manual

Programmable DC Power Supply (with Solar Array Simulation) 62000H Series
Operating & Programming Manual
4.3.2

Setting IV-Sequence

1. The number of default IV-SEQUENCE in an IV-PROGRAM is 0 and each IV-PROGRAM
can add IV-SEQUENCE freely to 100 sequences in total. In other words, the sum of
IV-SEQUENCE set in the total 10 IV-PROGRAMS is 100 maximum.
2. To add a new IV-SEQUENCE:
a. In an IV-PROGRAM page (Figure 4-26), when the cursor is at (4) of Figure 4-26,
press "
IV-PROGRAM and the screen will appear as Figure 4-27 shows.
b. In an IV-SEQUENCE page (Figure 4-27) under an IV-PROGRAM, when the cursor
is at (4) of Figure 4-27, press "
The "
new IV-SEQUENCE in the above two conditions.
Use " ", "
3.
4-27 shows.
S E Q N O.
I V – F I L E N O. =
S E Q T Y P E
T I M E
4. Use the numeric keys
Each IV-Sequence can set the following 4 items: (1) SEQ NO., (2) IV-FILE NO., (3)
SEQ. TYPE and (4) TIME. They are explained the following sections.
Press " " to confirm.
ENTER
5.
Press " " to return to IV-Program Page (Figure 4-26).
EXIT
6.
4.3.2.1

Setting Sequence Number

Use " ", "
1.
4-27 (1) shows.
When the cursor is at Figure 4-27 (4), press "
2.
can also use the numeric keys
4-22
" to add the first IV-SEQUENCE if there is no IV-SEQUENCE in the
" key is often used as the direction key and only used to add
" keys to move the cursor to the column to be set as Figure
= 1 _
0
= A U T O
= 0 ( S )
Figure 4-27
0 9
or "Rotary" (
~
" keys to move the cursor to the column to be set as Figure
0
~
" to add another new IV-SEQUENCE.
[ I V- S E Q U E N C E ]
( 1 )
( 2 )
( 3 )
( 4 )
) knob to set the value.
" to add a new IV-SEQUENCE. It
9 or "Rotary" (
▲
▼
) knob to enter the