Chroma 62000H Series Operating & Programming Manual page 133

Press " " again for execution. It will jump to the SAS MODE main screen as
ON/OFF
6.
Figure 3-164 shows. To quit, press "
Figure 3-164 shows the screen when the SAS MODE outputs. The EQ_PMP, EQ_VMP
and EQ_IMP are the actual operating points that are calculated from the settings of user
VMP and IMP via the hardware built-in formula.
The user can change the VOC, ISC, VMP and IMP parameters directly using the "
" " function keys from the screen of single unit. When any of the VOC, ISC, VMP or
IMP is modified, use "
The IV curve will update immediately and so too the EQ_PMP, EQ_VMP and EQ_IMP
parameters.
1.
2.
Figure 3-163
Figure 3-164
" to move the cursor to TRIG and press "
Definition of Fill Factor (FF):
Voc,Vmp,Isc & Imp parameters setting limit:
 
a. V V 0
oc mp
 
b. I I 0
sc mp

I
 
 
mp
V V 1
c.
mp oc

I
sc
" to return to the MAIN PAGE.
EXIT
V I

mp mp
FF
V I
oc sc

 

Manual Operation
",
" to confirm.
ENTER
3-91