Setting The Shot Id - Sony MSW-900P Operation Manual

4-7-7 Setting the Shot ID

In the SHOT ID page of the USER menu, you can set a shot ID of up to
12 alphanumeric characters, spaces, and symbols.
When the OUTPUT/DCC switch is set to BARS, DCC OFF, this shot ID
is output with the color bar signal. The shot ID comprises ID1 to ID4,
and the setting can be changed using the SHOT DISP page of the USER
menu. You can select the SHOT ID to be recorded superimposed on the
color bars on the SHOT DISP page.
Note
When the menu is displayed, the shot ID is not displayed even if the
color bar signal is output.
Follow the procedure below to set the shot ID.
MENU knob
1
Set the MENU ON/OFF switch to ON.
The page that was on the screen when the last menu operation ended
appears on the viewfinder screen.
MENU ON/OFF switch
Setting the shot ID
Chapter 4 Adjustments and Settings for Recording
CANCEL/PRST /
ESCAPE switch
(Continued)
4
4-83