Changing The System Password - Cisco TelePresence System Codec C40 Administrator's Manual

Cisco TelePresence System Codec C40/C60 and Profiles using C40/60
Contents

Changing the system password

We strongly recommend that you set a password
for any user with ADMIN rights, including the default
admin user, to restrict access to system configuration.
You can read more about password protection in the
► Setting passwords chapter.
D14636.10 Profile C60-C40 and Codec C60-C40
Introduction Web interface Web interface
1. Open the Change Password dialog
Hover the mouse over your user name, and
choose Change password
2. Set the new password
Enter your current and new passwords as
requested, and click
change to take effect.
If the password currently is not set, leave
the
Administrator Guide TC6.1, APRIL 2013.
System settings
in the drop-down list.
Change password for the
Current password field blank.
16
Setting passwords
www.cisco.com — Copyright © 2010-2013 Cisco Systems, Inc. All rights reserved.
Administrator Guide
Appendices