Changing The System Password - Cisco TelePresence MX200 Administrator's Manual

Cisco TelePresence MX200 and MX300
Contents

Changing the system password

It is mandatory to set a password for a user with
ADMIN rights in order to restrict access to system
configuration. This includes the default admin user.
A warning, saying that the system password is not set, is
shown on screen until you set a password.
You can read more about passwords in the
► Setting passwords chapter.
D14850.12 MX200 and MX300 Administrator Guide TC7.3, JULY 2015.
Introduction Web interface Web interface
1. Open the Change Password dialog
Hover the mouse over your the name, and
choose Change password
2. Set the new password
Enter your current and new passwords as
requested, and click
change to take effect.
If the password currently is not set, leave
the Current password
System settings
in the drop-down list.
Change password for the
field blank.
11
Setting passwords
www.cisco.com — Copyright © 2011–2015 Cisco Systems, Inc. All rights reserved.
Administrator Guide
Appendices