Change Cisco Webdialer Preferences; Sign Out Of Cisco Webdialer - Cisco 8941 User Manual

Change Cisco WebDialer Preferences

Note
Step 3
Choose a line or a phone.
If you have one phone with a single line, the appropriate phone and line are automatically selected.
If you have more than one phone of the same type, the list identifies the phone by device type and MAC
address. To display the MAC address on your phone, select Applications > Phone Information.
Step 4 Enter the phone number you want to dial, and select Dial.
Step 5 Select Hang up or hang up the handset after your call completes.
Change Cisco WebDialer Preferences
Procedure
Step 1 Initiate a call using Cisco WebDialer to access the Make Call window.
Step 2
Select one of the following options from the Make Call window:
• Preferred language
• Preferred device
Step 3 Choose a line or a phone.
Note
Step 4
If you have an Extension Mobility profile, select Extension Mobility from the Calling Device drop-down
menu.
Step 5 Ensure that you do not select Do not display call information nor Disable Auto Close.
Note

Sign Out of Cisco WebDialer

Procedure
Step 1 Access the Make Call or Hang Up window.
Step 2
Select Sign Out.
Cisco Unified IP Phone 8941 and 8945 User Guide for Cisco Unified Communications Manager 10.0 (SCCP and
SIP)
36
If you are using Cisco WebDialer for the first time, review preferences on the Make Call window.
If you have one phone with a single line, the appropriate phone and line are automatically selected.
If you have more than one phone of the same type, the list identifies the phone by device type and
MAC address. To display the MAC address on your phone, select Applications > Phone Information.
If you select Do not display call information, the Make Call Window is not displayed when you
next use the phone. If you select Disable auto close, the call window does not automatically close
after 15 seconds.
Contacts