Log Out Of Webdialer; Set Up, View, Or Change Webdialer Preferences - Cisco 7975G Software Manual

User Options Web Pages

Log Out of WebDialer

Procedure
Click the Logout icon in the Make Call or Hang Up page.

Set Up, View, or Change WebDialer Preferences

Procedure
Step 1 Access the Make Call page.
The Make Call page appears the first time that you use WebDialer (after you click the number that you want
to dial).
Step 2 (Optional) Make changes to your settings.
The Make Call page contains the following options:
• Preferred language: Determines the language used for WebDialer settings and prompts.
• Use preferred device: Identifies the Cisco Unified IP Phone (Calling device) and directory number
(Calling device or line) that you use to place WebDialer calls. If you have one phone with a single line,
the appropriate phone and line are automatically selected. Otherwise, choose a phone or line. If you have
more than one phone, it will be specified by device type and MAC address. To display the MAC address
on your phone, choose
Note
• Do not display call confirmation: If selected, prompts WebDialer to suppress the Make Call page. This
page appears by default after you click a phone number in a WebDialer-enabled online directory.
• Disable Auto Close: If selected, the call window does not close automatically after 15 seconds.
> Settings > Network Configuration > MAC address.
If you have an Extension Mobility profile, you can select your Extension Mobility logged-in
device from the Calling device menu.
Cisco Unified IP Phone 7975G, 7971G-GE, 7970G, 7965G, and 7945G User Guide for Cisco Unified Communications
Cisco WebDialer
Manager 9.0 (SCCP and SIP)
99