How Do I Exit From A Running Application; How Do I Connect Two Calls And Then Drop From The Line Myself - Cisco 8941 User Manual

How Do I Exit from a Running Application?

How Do I Exit from a Running Application?

Question
How do I exit from a running application?
Answer
To exit from a running applications you must:
1 Press Applications
2 Use the Navigation pad and Select button to scroll and select Running Applications.
3 Select a running application and press Close App to close the application.
When prompted, save your changes.
4 Press Exit to end the running application.
If you do not exit a running application, it continues to run in the background.
How Do I Connect Two Calls and then Drop from the Line
Myself?
Question

How do I connect two calls and then drop from the line myself?

Answer
When you are on an active call (not on hold), do the following:
1 Press Transfer
2 Press Transfer again. You do not have to wait for the recipient to answer to complete the transfer.
Cisco Unified IP Phone 8941 and 8945 User Guide for Cisco Unified Communications Manager 10.0 (SCCP and
SIP)
88
.
and enter the transfer recipient's phone number in one of these ways:
• Press the session button of a held call.
• Enter the transfer recipient's phone number.
• Scroll to a Call History record and press Call.
• Press a speed-dial button.
• Press Speed Dial, enter a speed-dial number or highlight the number you want to call, and press
Speed Dial again.
• Press Active Calls and select a held call. The transfer completes immediately.
Frequently Asked Questions