Bluetooth; Add Bluetooth Accessory; Connect Bluetooth Accessory; Procedure - Cisco 8941 User Manual

Accessories

Bluetooth

Add Bluetooth Accessory

This procedure applies to the Cisco Unified IP Phone 8945 only.
Before you add a Bluetooth accessory, it must be discoverable by the phone. Look for a flashing LED on a
Bluetooth accessory as an indication that it is discoverable. For more information, see the documentation
provided by the Bluetooth accessory manufacturer.

Procedure

Step 1

Press Applications

Step 2 Use the Navigation pad and Select button to scroll and select Accessories.
Step 3 Select Add Bluetooth Accessory.
The phone searches for discoverable accessories that are supported. When an accessory is found, it is added
to the list in the Adding Bluetooth Accessory screen.
Step 4
Select the Bluetooth accessory and press Connect.
The phone automatically attempts to connect the accessory using a Bluetooth device PIN of 0000. The Adding
PIN screen displays if your accessory requires a different PIN.
Step 5
Enter the PIN for your accessory if the connection is not acquired automatically.
When the connection completes, the Bluetooth active icon
mark displays next to the connected accessory.

Connect Bluetooth Accessory

This procedure applies to the Cisco Unified IP Phone 8945 only.
Before you can connect a Bluetooth accessory, it must be already added as an accessory to the phone.
Procedure
Step 1
Press Applications
Step 2 Use the Navigation pad and Select button to scroll and select Accessories.
Step 3
Select the Bluetooth accessory and press Connect.
When the connection completes, the Bluetooth active icon
mark displays next to the connected accessory.
.
.
Cisco Unified IP Phone 8941 and 8945 User Guide for Cisco Unified Communications Manager 10.0 (SCCP and SIP)
displays on the phone screen header and a check
displays on the phone screen header and a check

Bluetooth

83